Tempered Glass Screen Protector for Ruggex Scorpio

Please note there is a small issue when using this protector.
​Unfortunately it reduces the sensitivity of the touch buttons at the bottom of the screen.  Basically the back and home buttons may not respond sometimes, however 9 times out of 10 it will be ok.  It would mean you would need to press the button 2 or 3 times for it to activate when this occurs.  Despite this minor issue we still think it would be worthwhile to have a tempered glass protector for your Scorpio due to the extra protection it affords

Description

This Premium Tempered Glass Screen Protector is perfect for the ruggex model in the title. It protects your ruggex from knocks and scratches. Ultimate Scratch Protection with an industry-high 9H hardness (harder than a knife blade), this protector is virtually impossible to scratch, whatever you whack against it. Perfect Fit Precisely cut to cover the entire flat surface of your ruggex screen, keeping the earpiece speaker, camera, light sensor and home button totally unobstructed. With a Retina Clarity 99% Transparent, 0.3mm thickness and Oleophobic Coating, enjoy your ruggex original HD retina display and high-response touch. Smooth Feel Premium tempered glass makes this screen protector much smoother than plastic alternatives. Fingers glide across just like your original glass screen.

0.3mm Tempered Glass for enhanced impact resistance.
Rounded Edges, more durability & no chipping with 100% Customer Satisfaction.
Extremely high hardness: resists scratches up to 9H (harder than a knife).
Dust-free, fingerprint-free, one-push super easy installation, bubble free.
Oleophobic coating protects against fingerprints

Installation

Wash your hands with a good soap to remove excess oil and dirt.  Clean tabletop indoors to help prevent dirt and dust particles from getting on the screen while applying the glass.  Clean Your Phone - First of all it is very important that you take your time during Step #1 to clean and prep your phone before placing the glass.

1.  begin to wipe down your phone glass completely removing all grease, smudge marks, and dirt. Take your time going around the edges and home button. Look at the screen from all different angles to ensure that you have removed all marks from the screen.  If a dust particle is left on the screen, it could potentially cause the tempered glass to have a bubble once placed on the screen. Take your time!! After you feel that you have removed everything you can you can move onto step 2.
2. Placing The Glass - Carefully remove the glass from the protective pouch/envelope. Place your phone with its freshly cleaned screen directly in front of you laying horizontally. Turn the tempered glass so that the side with the protective tab is facing the phone.  Pull the tab to open up 25% of the screen.  Gently start positioning the glass making sure the edges, top and bottom line up. 
3. Once you are happy that they line up, place the uncovered part of the protector on the phone glass and  pull the tab slowly to remove the clear plastic adhesive from the glass. With both hands on the glass (top & bottom), slowly lay the glass making sure that is it centered as perfect as you can get. Then proceed to slowly lay the glass down towards the opposite end of the phone without adding any additional pressure to the glass.
4. Once the tempered glass is on lined up, it will fall perfectly centered.  Let The Glass Do The Work - After you have fully placed the tempered glass screen protector on the phone, you will see quickly that the glass will do the work and adhere to the screen of the phone. With a little bit of pressure you can push around the edges or anywhere that you may see a bubble. Within a days time all the edges and any little bubble spots should go away.  

Why buy from MantisTech?